Portcullis Revisions

The revision numbers are easy to work out, the first part, "10" is the year, the second part "02" is the month, the third is the day and the final part is the general version number. Simple really !

Revision - 10.11.1.1. (No known conflicts with previous versions, see Version 10.04.27.0)
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6	Fixed issue with temperatures staying visible when clicking directly on to weather icon
5	Added function to manually archive folders if auto archive is not selected
4	Added function to allow for auto archiving of folders.
3	Voicemail file added to backup and restore routine
2	Telephone book file added to backup and restore routine
1	Added Telephone book to allow favourite numbers to be stored and used in voicemail system
Revision - 10.10.24.1. (No known conflicts with previous versions, see Version 10.04.27.0)
28	Fixed issue with Pick List not going away when animation set to None
27	Fixed format issue after marking message as read
26	Fixed issue with screen saver not resetting after incoming call
25	Added Reset cycle button to sensor setup screen
24	Added Test and Toggle buttons to sensor set up screen
23	Fixed fault with smoke alarm not being triggered
22	Email notification of incoming call option when alarm set
21	Email notification of door bell option when alarm set
20	Email notification of alarm set option
19	Added Read / Unread flag to voicemail screen
18	Added Caller ID duration timer
17	Fixed error reading unread voicemails on start-up
16	Messages waiting status reset when voicemail screen is entered.
15	Voicemail screen sorted with most recent at top of screen
14	Voicemail date now reads dd/mm/yyyy not yyyy/mm/dd as before
13	Add call ID to voicemail viewer
12	Fixed fault with uptime display on overview screen
11	Added function to overview screen to determine internet connection status
10	Fixed bug that allowed keypad to disappear when user clicked on main screen when entering pass code
9	Fixed issue with sensor overview screen not displaying status of NO / NC sensors properly
8	Fixed issue that prevent access to video / still playback screen
7	Empty video and still directories are deleted the following day
6	Sensor Overview screens sets current sensor status on load
5	Added last cycle information to Sensor Overview screen that only updates when that sensor data is shown
4	Fixed error showing the initial “Next” button on the Sensor Setup screen
3	Added function to record the last time a sensor was activated
2	Corrected fault that shows sun and moon icon when no connection but weather plug-in enabled.
1	Fixed error when calculating and saving uptime
Revision - 10.08.07.1. (No known conflicts with previous versions, see Version 10.04.27.0)
31	Screensaver does not show pictures if alarm is set, it will only blank screen in this case.
30	Added check to make sure weather WOEID is set before trying to display weather
29	Add function to disable all animation if required
28	Fixed error removing old empty picture and video files
27	Sun and Moon icon now shows weather symbol for local weather
26	Corrected path error on still folder deletion
25	Minor changes to main screen
24	Added option to mail log file with error report to assist with debugging
23	Fixed error with reporting of error number and description
22	Added routine to delete empty stills and video folders before moving to archive.
21	Added ability to review log files moved to archive folders using normal screen
20	Fixed issue showing sun or moon when weather plug-in is not enabled
19	Improved video and still recording routines, and added indicators to show status
18	Revised camera viewer layout
17	New icons added for video playback and cameras
16	Fixed error going from video files to video directory listings
15	Hide the video buttons when viewing stills on the playback screen
14	Added Play, Stop, FF REW, and Pause buttons for video playback
13	Revised video file format to allow for quicker indexing and loading
12	Corrected error reading video directories
11	Corrected fault not displaying camera playback after IP support was activated
10	Significant upgrades to button graphics routine
9	Voicemail icon flashes on screensaver if active and messages are waiting
8	Record screensaver off / on in log file
7	Fixed issue with screen off / on when running on non 24 hour systems
6	Added separate sensor data field so all sensors can be set to NC or NO
5	Added 4 Alarm Zones that can be set different ways to suit the property
4	Fixed error when deleting sensor where only part of setup is copied
3	Voicemail icon flashes when messages are waiting on system
2	Fixed error reporting sensor state on overview screen
1	Fixed error when closing and reloading sensor overview screen
Revision - 10.08.06.1. (No known conflicts with previous versions post version 10.04.27.0
43	Disable system status shield click when arming alarm
42	Archive routine and folders for videos and stills over 28 days old
41	Fixed error recording stills on alarm
40	Added option to select no camera matched to sensors
39	Corrected fault with clearing clock face if alarm tripped
38	Fixed keypad before entry clock on alarm disable
37	Fixed fade error with windows XP, only allowed on Vista and 7
36	Added keypad tones to keypad
35	Add wave sound to sensor clicks on sensor overview screen
34	Volume set to high for duration of doorbell sample play
33	Fixed error with sunset not working on non 24hour clock systems
32	Added "Edit Sensor" button on Sensor overview form and info panel
31	Restyled sensor overview screen to be more user friendly
30	Added function to allow user to select door bell chime required.
29	Record last weather values if weather enabled but no connection to get latest figures
28	Added function to animate buttons if required
27	Fixed missing lines of code on reset program process
26	Past weather shows on chart even if no connection by using last known figures.
25	Added extra page for general settings
24	Added advanced settings form to hold advanced settings
23	Fixed form positions and visibility if no animation is selected
22	Removed spurious files from system.
21	Fixed error when selecting sensor from picklist which corrupted data file
20	Removed unused icons and graphics
19	Check for connection before allowing registration
18	Hide security code that is produced.
17	Protect admin function with passcode entered via key pad
16	Add version number to ini file on close for update runs
15	Fixed issues with reading registration code
14	Improved help and prompt notifications
13	Fixed issue showing keyboard when animation set to fade
12	Fixed problem saving new sensor data when adding new sensor
11	Fixed error loading weather after enabling plug-in and with no internet connection.
10	Files list sorted when viewed
9	Log files older than 28 days are moved to archive sub folder
8	Quick click moon / sun icon to get to weather screen
7	Grey out alarm options on sensor setup if alarm not enabled.
6	Long wait while reading alarm codes
5	Option to switch on alarm function if required.
4	Improved graphics
3	Fixed error with home away alarm setting
2	Large countdown figures for alarm exit rather than bar
1	Make clock face for entry exit timer
Revision - 10.07.02.0. (No known conflicts with previous versions post version 10.04.27.0
26	Fixed delay while reading alarm and user codes
25	Fixed error with resident simulator plug-in flag
24	Added option to disable Alarm plug-in
23	Improved graphics with a choice of options
22	fixed error with more than 3 alarm codes
21	Add entry / exit zone to alarm sensors
20	Reset shield after examining error reporting
19	Fixed Version ID position on start-up
18	Improved error reporting with camera fault.
17	Fixed bug error checking disk space on XP
16	Fixed bug with camera checking
15	Fixed error with checking internet connection once a day.
14	Corrected error reading disk size in Windows 7 on system overview page
13	Improved log file reporting
12	Unregistered version are limited to 2 installed IP cameras only
11	Unregistered versions are limited to 5 installed sensors
10	Fixed Velbus start error when not found
9	Major overhaul of system health shield
8	Fixed duplicating error when adding another sensor.
7	Fixed bug were sunrise / sunset data was not converted properly during day time boot
6	Changes to error reporting system
5	Corrected update notification mail function error
4	Corrected "info" panel position on smaller screen layouts
3	Improved start-up on screen reporting
2	Fixed error checking for updates when not connected to internet
1	Started process to support X10, intention that it will function under X10 or Velbus, not both
Revision - 10.6.16.0. (No known conflicts with previous versions, see Version 10.04.27.0)
14	Fixed error when "C" is hit twice during wrong pin code entry
13	Improved night time checks and updates routine
12	Added routine to delete 12 month old video and still directories
11	Improved back up applet
10	Fixed update error when set to mail update actions
9	Improved backup routine
8	Disk space check on start up and at 4am every day
7	Fixed error truncating back up path selection from pick list
6	Corrected volume function reset to normal volume after door bell volume
5	Corrected alarm keypad error when using "C", no longer crashes program
4	Corrected sound function when alarm is set the "Home" to be muted
3	Improved start up process with progress display
2	Screen on and screen off events now logged
1	Corrected error with saving screen on and screen of times.
Revision - 10.04.27.0. (No known conflicts with previous versions, see Version 10.02.30.0)
1	Product underwent a major 60 day stress test, no major errors and no new updates.
Revision - 10.02.30.0. (No known conflicts with previous versions, see Version 10.01.31.0)
5	Fixed issue with sending stills by e-mail
4	Improved support for up to 5 emails with options of what each receive.
3	Improved keypad controls on entry process
2	Improved help and update screens
1	Corrected error on start-up if internet is not connected.
Revision - 10.01.31.0. (Requires Net 4.0 to operate)
53	Added function to check if soundcard or wave device is installed.
52	Added function to allow recording of stills or video depending on alarm status.
51	Fixed error with pick list boxes not being fully displayed
50	Back up Path Field added to allow back up to USB stick or network drive for improved data security
49	Stills and Videos now sorted into daily directory
48	Number of cameras installed shown on overview screen
47	Add field to control preview time when snap displayed on screen
46	Added facility to e-mail snapshot direct to registered address
45	Added sensor field to control cameras, status either while alarmed, always or never
44	Added field to show folders and field available.
43	Video / stills playback form
42	Support for up to 4 IP Camera, Vivoteck
41	Improved registration process with encrypted key
40	Unavailable icons are now hidden and screen resized to suit.
39	Added toggle Resident Simulator on or off option
38	Added field reset button (Rs) to keyboard plus (\) and (:) for item 37 below.
37	Support for backing up data files to USB or Network drive.
36	Added auto On / Off support
35	Added default alarm deactivation wav.
34	"C" on keypad clears field, not just last input.
33	Correct error saving sensor vocalise data
32	Play sound once selection has changed on alarm and sensor setup screen
31	Touch screen support improved
30	Sensor / devices types added
29	Improved start-up / splash screen
28	Greyed out functions not available or not enabled.
27	Historical weather data saved to file when system closed
26	Added help pointers to weather setup panel.
25	Added sun / moon controlled by sunrise / sunset weather data RSS
24	Added toggle voicemail on or off option.
23	Added toggle weather on or off option
22	Added weather setup screen
21	Added historical weather data trend chart covering every hour for last 7 days
20	Added routine to enumerate modems and ports.
19	Added initial support for modems
18	Added activity light to bottom left of screen
17	Added status shield to replace status lights and give more information
16	Added support for weather page with current and 2 day forecast based on Yahoo weather RSS based on location
15	Fixed alarm issue, dual logic !
14	Fixed visibility of entry exit bar after use.
13	Added MAC and IP address reporting to overview screen
12	Support for Windows 7
11	Changed graphics movements on sensor setup screen
10	Adjusted font sizes and standard text to suit screen size
9	Added visible entry / exit timer bar
8	Corrected error with sensor action routine
7	Fixed bug with log file reporting
6	Revamp of graphical buttons on general settings page.
5	Added IP camera setup form.
4	Added voicemail settings screen.
3	Added initial support for IP cameras.
2	Fixed problem with error message boxes locking up system.
1	More improvements to graphic slides.
Revision - 9.12.07.0. (No known conflicts with previous versions)
7	Added field to display install date and cycles on sensor setup screen
6	Added Tools function to allow cleaning of touch screen for 60 secs without making input.
5	Corrected errors with checking internet connection on start-up
4	Improved log reporting on program settings
3	Improved data and sensor save routines
2	Fixed start-up bug with blank alarms user details.
1	Improvements to graphic slides
Revision - 9.10.15.0. (No known conflicts with previous versions)
11	Corrected system file fault when upgrading from Version 9.10.15.0 or earlier
10	Click on status lights to reveal long form view of system status
9	Subtle navigation banner added
8	Graphical layout changed to suit increased functions
7	Improved shutdown routine.
6	System reset function added to reset to installed values
5	More audible countdown exit / entry timer with audible remaining duration
4	Fix error indexing alarm ring time
3	Send e-mail when alarm reset after tripped
2	Reset alarm after tipper by intruder, and ringing completed
1	Send e-mail when alarm tripped by intruder, and code not entered
Revision - 9.10.10.0.
6	Corrections to log entry when creating new log file
5	Fixed fault on update routine when no updates found
4	Upgrade of drag and select list. Now iPhone style
3	Fix of individual wav file on alarm deactivation.
2	Issue with volume and audio on re-entry fixed
1	Corrected initial sound switch setting
Revision - 9.10.08.0.
6	Corrections to log entry when creating new log file
5	Fixed fault on update routine when no updates found
4	Upgrade of drag and select list. Now iPhone style
3	Fix of individual wav file on alarm deactivation.
2	Issue with volume and audio on re-entry fixed
1	Corrected initial sound switch setting
Revision - 9.10.05.0.
5	Improved Graphics - Drag to scroll on log files.
4	Fixed error with sound switch not reflecting change
3	Fixed error when selection Com Port in use.
2	Correct error when loading log file selection list
1	Screensaver disabled when alarm is set.
Revision - 9.09.29.0.
6	Update now includes a version back up to allow a complete roll back if required
5	Mail program rotations option added.
4	Mail program errors to author option added.
3	Addition of field to allow addition of e-mail address for sending mail
2	Improvements to device overview.
1	Ability to mail the previous days activity log.
Revision - 9.09.11.0.
7	Improved help and system messages
6	Corrected error displaying com port options
5	Error report now relays basic sensor information for analysis
4	Add cycle counter for devices
3	Add install date for devices
2	Corrected intermittent fault with screensaver
1	Fixed bug in pick list displays
Revision - 9.09.09.0.
7	Enabled printing of reports direct from log viewer
6	Improved upgrading notification
5	Fixed bug that clears sensors on a restart
4	Fixed issue with pick list scrolling
3	Corrections to reporting updates to log file
2	Correction to version information displayed
1	Improved update system using stand alone update program to install and update files in controlled and safe manner.
Revision - 9.09.04.0.
13	Improved update notification and download.
12	Installed sensors reset after restoring system files.
11	Improved error reporting with system information
10	Addition of system overview screen.
9	Reload sensor data after restoring data files.
8	Record start-up time and current and total system up time
7	Additions to sensor and location option listings.
6	Improved status lights.
5	Routine to stop selection of existing sensor and circular references to same sensor
4	Tap sensors on walk though for more information.
3	Sensor walk through graphics improved, now supports 84 sensors per page..
2	Selection lists now in alphabetical order.
1	Scrolling selection lists can be dragged now
Revision - 9.08.25.0.
7	Entry / Exit tick will not play if time is between screen off and screen on time.
6	Add moon / sun icon to show the status of the dusk sensor when it is installed.
5	Correct error deleting sensors.
4	Hide exit button unless main menu is centred.
3	Catch invalid time enter on sensor and screen setup.
2	Updates ini files on each load to ensure most up to date version is available and for crash recovery.
1	Backup routine improved to capture only essential data files
Revision - 9.08.23.0.
15	Addition of file access light.
14	Sensor status recorded during safe shutdown.
13	Detection of unsafe shutdown or crash (to allow for system recover in next major revision)
12	Purge log file directory every 10 days of log files older than 90 days.
11	Addition of quick check status "lights" to main screen.
10	Set screen off and on times.
9	Select either random or sequenced pictures for screensaver.
8	Errors now write to log file also.
7	Corrected formatting on log screen
6	Alarm will not set if at least one alarm code has not been set
5	Add user names to alarm codes
4	Modify all alarm codes and admin code in secure area
3	5 additional alarm codes with own user set welcome wav
2	Admin code protection for alarm setup area
1.	Addition of admin code requirement on first install
Revision - 9.08.18.0.
10	Mail alarm instances to selected mail.
9	Check internet connection on hourly basis
8	Check screen resolution on load
7	Delete read message files from system
6	Correction to sensor selection screen
5	Corrections to Screensaver option selections
4	Support for all NC/NO sensors such as Smoke, Flood, Frost, and Gas.
3	Tidy up of start up screen and graphics
2	Display message numbers on sub menu
1.	Major update of options pick list and routines
Revision - 9.08.15.0.
4	Support for NC/NO panic button with code required to silence.
3	Improvements to alarm exit sequence and graphics.
2	Correct resetting of screen under alarm conditions.
1.	Updated automatic checking for updates and notification
First Stable Release - 9.08.14.0.
5.	Automatic checking for updates and notification
4.	Minor graphical changes to some text boxes to ensure they display fully on differing resolutions, use Arial Narrow font.
3.	Minor improvements to update check sequence, more informative prompts.
2.	Changed icon sizes on log page
1.	First stable release.